Service Areas: Utah | Salt Lake | Davis | Morgan | Wasatch
Service Areas: Utah | Salt Lake | Davis | Morgan | Wasatch
Your new hot tub is on the way, but you just realized your electrical system isn't set up for a spa. Let Sunflower Electric get your hot tub powered up. Sunflower Electric runs the dedicated 240V circuit, GFCI disconnect, and bonding your spa needs, all permitted and inspected. Need a panel upgrade to handle your new swim spa? No problem. Call Sunflower Electric today for all of your Utah hot tub wiring and electrical needs!
Properly sized wire and breaker for your exact tub, run to wherever it sits, installed for Utah winters. A tripped circuit in January can freeze your tub. Our weatherproof, reliable wiring keeps the heat on all season.
Building a home? We'll plan and rough-in hot tub power during construction, when it's easiest and cheapest. Hot tub on the deck, patio, or back corner of the yard? We run power there, including underground runs.
From panel to pad. We check your panel to make sure it can handle the additional load. Everything is up to code and permitted. Let us take away the stress of figuring out how to power that new hot tub!
Please reach us at office@sunflowerelectricutah.com if you cannot find an answer to your question.
Add an answer to this itMost full-size hot tubs need a dedicated 240V circuit, usually 40–60 amps depending on the model. They also need GFCI protection and a disconnect near the tub. Smaller "plug-and-play" tubs can run on a standard 120V outlet, but that outlet still needs to be a dedicated, GFCI-protected circuit.em.
Before, if you can. We can plan the wire run, check your panel, and pull the permit so power is ready when the tub arrives. Call Sunflower Electric as soon as you've picked out your tub.
Yes. A new 240V circuit for a spa requires an electrical permit and inspection in most Utah cities. Sunflower Electric handles the permit and coordinates the inspection.
It depends on your panel size and what's already on it, like AC, a dryer, an oven, or an EV charger. Many older 100-amp panels don't have the room. Call Sunflower Electric for a panel check. We'll run the numbers and let you know if an upgrade is needed.
It mostly comes down to the distance from your panel to the tub, whether the run goes underground, and whether your panel needs an upgrade. Call Sunflower Electric for a free quote on your setup.
Sunflower Electric can install your hot tub wiring and electrical in many counties across Utah including:
Don't see your county? Give us a call and see if we service your city!

Upgrading to a bigger spa or moving it across the yard? We'll resize the circuit and relocate the power to match. Let us get 240v power to your hot tub so you can get relaxing!

Nuisance trips can make you not want to use your hot tub. Losing power can mean a bad breaker, moisture, or wiring issues. We'll track down the cause and get you back in the bubbles.

We can help with spas of all sizes. From a small 2 person tubs to large swim spas, we can get it powered up. Bigger tubs and spas can need more power. We size the circuit, breaker, and wire for swim spas and high-amp models.
Picked out your hot tub? Let's get it wired before it arrives. Send us your tub model, where it'll sit, and when you are looking to get the electrical run. We'll check your panel, plan the run, and give you a clear quote. Call, text, or email us to get started today!
Utah County / Salt Lake County / Davis County / Morgan County / Wasatch County / Weber County
Call: (801) 407-9907 Email: office@sunflowerelectricutah.com
Open today | 12:00 am – 12:00 am |
Copyright © 2026 Sunflower Electric Services - All Rights Reserved. Privacy Policy
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.